Tag: filter holder

Home 3D Repository filter holder
58mm adaptor ring and filter holder

My first 3D printing design! An adapter ring and a ND filter holder kit. Most of the ND filter holders look the same and are all black. This filter holder looks different and can be printed in different colors to add more fun. The adapter ring fits on any 58mm lens and the filter holder […]

M12 Lens Filter Holder

Small bracket to hold a 12.5 mm diameter interference filter in front of a M12 (S-mount) lens. This is a small part with a fairly tight fit, so it required some work with an xacto knife and needle file to clean up, but after that it does fit well and hold the filter securely. OpenSCAD […]

SJ 5000 52 mm filter holder/adapter

We needed an SJ 5000 52 mm filter holder/adapter, to film our “Gimbal Test” Kickstarter Project Footage. There are none available, so we simply designed an adapter/filter-holder that is press-fit onto the SJ 5000 rubber around the lens. And we wanted to be the first … so enjoy https://www.youtube.com/watch?v=HQyuCmoNdcc URL: http://www.thingiverse.com/thing:875723 Author: RCRebel@thingiverse

Welding Plate Filter Holder

I had to modify the filter plate to hold my welding lenses. Mine are approximately 115mm and did not fit in the original. Mine were slightly thicker as well. I printed with support, no raft. 35% infill and then it needed some sanding in the groove so that it could hold the filter plate. URL: […]

Filter holder lens cap 72mm

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/8HEIK2nbcWP Designed to fit my Samyang 500m Telephoto Lens and the SEL55-210 hood connected to any Sony e-mount Lens. URL: http://www.thingiverse.com/thing:729296 Author: faydra6410@thingiverse