Tag: lens hood

Home 3D Repository lens hood
Distagon f/4 40 mm C lens hood

I recently purchased a Hasselblad 40mm C f/4. I love medium format cameras and lenses. The are sharp, work very well, and are built to last, this lens is no exception.It’s a beast weighing in at 1.375kg ~3lbs. I’ve been scared to shoot it because I didn’t have a filter to mount on it. Older […]

Hasselblad SWC lens hood

You will need a 62mm to 67mm filter adapter ring to make use of this hood as there is a retention ring to hold the hood into place (i didn’t need to use any glue as it was tight enough to keep it in place). Print these two part separately and the small ring should […]

Bebop Lens Hood for Hoya 43mm UV Filter Lens

This is an adaptor to fix the bebop and the Hoya 43mm UV filter lens. There is 1 mm difference between the GoPro lens and the inner diameter of the hood. It is on purpose. Use some black tape on the lens to increase adhesion. URL: http://www.thingiverse.com/thing:1525776 Author: sd2706@thingiverse

Tamron 17-50 f/2.8 (non VC) delete/cover ring

A replacement part for Tamron 17-50mm f/2.8 XR Di II LD (non VC!). The part is to cover a distance between front lens and hood/filter mount. The original part can be easily damaged and lost, then the internal parts like screws etc are being visible and dust can easily accumulate inside the lens housing. URL: […]

Lens Hood for Canon HF M500

Openings for Instant AF finder and mics. Hole on bottom allows remote IR sender to be placed in front of sensor. Requires a 43mm to 52mm filter adapter. Looks a little like an XA25/G30 hood. URL: http://www.thingiverse.com/thing:1136783 Author: PCFlyer@thingiverse